Maintaining Your Kismile Nugget Ice Maker: A Complete Cleaning Guide

Introduction

This Kismile Nugget Ice Maker Because of its powerful performance and easy to carry, by the majority of consumers love, but there are many consumers reflect do not know how to use the ice machine comes with self-cleaning mode for cleaning, today we take the Z5815SNH model ice machine as an example, step by step details on how to use its own self-cleaning function to clean your ice machine!

The Self - Cleaning Function: How It Works​

Activation​

Activating the cleaning mode of the Kismile ice maker is very simple, all you need to do is to locate the clean button on the maker panel, which is very clearly marked “ice clean”. Add the appropriate amount of water and press the button. Once activated, the ice maker will start working.

Process​

During the self - cleaning cycle, the ice maker pumps a cleaning solution (usually a mixture of water and, if required, a small amount of a mild, food - safe cleaner) through its internal components. The solution circulates through the water reservoir, the pipes that transport water to the ice - making chamber, and the ice - making chamber itself. As it flows, the cleaning solution works to loosen and dislodge any loose debris, dirt, or mineral deposits that have accumulated over time. The movement of the solution, combined with the gentle scrubbing action (if the cleaner has some abrasive properties), effectively breaks down and removes these contaminants.​

Duration

The self-cleaning cycle typically lasts 10 to 15 minutes, which is just enough time for the cleaning solution to thoroughly clean the internal components. However, if there are large amounts of dirt or mineral deposits, it may be necessary to run the self-cleaning cycle several times.

Frequency

It is advisable to use the self - cleaning function at least once a week. If you use the ice maker frequently, perhaps several times a day, or if you reside in an area with hard water, increasing the frequency to two or three times a week is recommended.

Manual Deep Cleaning: A Step - by - Step Guide​

Step 1: Safety First - Unplug the Ice Maker

Always unplug the Kismile Nugget Ice Maker from the electrical outlet before beginning any manual cleaning. This simple but important step eliminates the risk of electrical shock when operating the unit. Even if the ice maker appears to be turned off, there may still be residual power in the system, so unplugging is a non-negotiable safety measure.

Step 2: Empty the Ice Basket and Open the drain plug

Ice Basket: Remove the ice basket from the ice maker. Pour out the remaining ice. If there are ice chips stuck to the sides of the ice basket, remove them by gently tapping the basket against the sink or by scrubbing it several times with white vinegar. Make sure the ice basket is completely empty because any remaining ice can melt during the cleaning process and cause water to build up, which can easily damage the inside of the machine.

Drain plug: This product comes with a drain plug that can be opened directly to drain the water, eliminating the hassle of picking up and pouring the water, which is required to empty the inside of the ice maker before it can go into self-cleaning mode. Once emptied, simply rinse the reservoir with warm water to remove loose debris.

Step 3: Add the right amount of water

 Once the water inside the ice maker has been emptied, you can start preparing to activate the cleaning mode. Open the lid of the ice maker and add the right amount of water, preferably water at room temperature is best, after all, hot water may damage the performance of the ice maker to some extent. 

Step 4: Close the lid and turn on the self-cleaning mode button.

After adding water, you need to put the lid on the ice maker, and then open the self-cleaning mode, that is, the ice maker's board display “ice clean” button, if you press it and did not start running, do not worry, you can press the button to stay longer, once you hear the water began to rotate the sound, it means that the ice maker has begun to self-clean. Once you hear the sound of water turning, it means that the ice maker has started to clean itself.

Step 5: Wait a few minutes and open the drain plug

After the ice maker starts running, you need to wait patiently for about 10 to 15 minutes first, which is the time to clean all the dirt inside. When the self-cleaning mode of the ice maker is over, you can just open its own water plug to drain the water out so that it will soon be ready for secondary operation.

Tips for Keeping Your Ice Maker Clean

Use Filtered Water

Using filtered water in your Kismile Nugget ice maker can greatly reduce mineral deposits. A water filter removes impurities such as calcium, magnesium and iron from the water. These minerals are responsible for the formation of scale and stains in your ice maker. Using filtered water will not only keep your ice maker cleaner for longer, but it will also improve the quality of your ice. Ice cubes will be purer, free of odors or tastes, and will maintain a soft, chewy texture.

Keep the area around your ice maker clean

Regularly wipe down countertops or surfaces where the ice maker is placed. This helps prevent dust and debris from entering the ice maker when opening and closing the removable top or handling the ice basket. Clean surroundings also reduce the chances of dust and other particles being drawn into the ice-making chamber, which can interfere with the ice-making process or contaminate the ice.

Storing the Ice Maker Properly

If you are not going to use your ice maker for an extended period of time, it is important to store it correctly. First, thoroughly clean the ice maker using the self-cleaning feature and manual deep cleaning. Empty the water reservoir completely and allow the ice maker to air dry for a few hours. Then, store it in a dry, clean area. Avoid storing it in a damp or wet area, as this can promote the growth of mold and bacteria.

Conclusion

Cleaning your Kismile Nugget ice machine is an integral part of owning this high-performance equipment. By using the automatic self-cleaning feature on a regular basis and manually deep cleaning as needed, you can ensure that your ice machine continues to produce quality, clean and safe ice. Remember to follow the steps carefully, use the proper cleaning tools and products, and always prioritize safety. With proper maintenance, your Kismile Nugget Ice Maker will provide you with years of quality service, whether it's at home, in the office, or at your next big event, providing you with great tasting chewable ice for your beverage and snack needs.